Downloads
Upgrade Comparison
Support Articles
- Invalid Measure Error or Charging Issues
- Aperture Sizes and Screen Rulings
- Calibrating the 500 series instruments
- Charging Problems - Charge Battery, etc. 500 series
- Full Calibration on the 500's
- 500 series default settings
- 500 Series Instrument Training
- Aperture kits for the 500 series
- Can I change the polarization of my 5xx in the field?
- Cleaning the 500
- Cleaning your 500 series calibration reference
- COM Port Assignments??? Where to look...
- COM Port Mapping with Keyspan USB Serial Adapter
- Common Calibration Errors for 500 Series
- Configuration following a Reset - 500 Series
- Connecting a 500 Series to Toolcrib
- Connecting a 530 to Intellitrax
- Dark Screen Syndrome - 500 Series Instruments
- Density value displayed seems too low when reading in dot mode
- Different Readings Between 2 or More Instruments
- Functions Missing on 500 Series Instruments
- How To Read Printing Plates With The 500 Series Spectrodensitometer
- Inaccurate readings with a 500 Series
- Instrument Apertures & Accurate Dot Measurement
- Instrument Reports Minus Dot Values
- Invalid Measurement Error
- Load Defaults Error
- My Density Readings are NOT what I Expected
- Optics Change Error
- Pinouts - 500 Series Instruments
- Polarization or UV filters with Micro-Spot Aperture
- Recertification - - Is it Really Required?
- Reset - is it necessary?
- Resetting a 500 Series Reflection Spectrodensitometer
- RS232C Ouput Defaults - 500 series instruments
- Schematic; SE108-92 (9-Pin Serial PC Cable)
- Stochastic Screening & 500 Series - are Dots Accurate?
- ToolCrib Downloads and Support Articles
- Troubleshooting an RS-232 Interface Problem
- Turning off Access to the Configuration menu
- Turning on a 500
- Upgrading a 500 Handheld
- Video for Cleaning a 500 Series Instrument
- When do I need a driver?
- Which 500 do I have and what can it do
- Wrong Charger Error on 500 series
